Paper
9 October 2006 Impact of the surface characteristics on the quality of INSAR elevation data
G. Heidelmeyer, U. Klingauf
Author Affiliations +
Abstract
Due to upcoming new data driven technologies in the aviation the impact of digital terrain data is growing conspicuously. Especially for ground near operations reliable terrain information is necessarily demanded. Based on modern earth observation technologies a new generation of elevation data is obtainable. However it shall be analysed how far data derived from remote sensing techniques like INSAR or LIDAR can be applied for aviation purposes. Formerly terrain data were represented in relation to the bare earth to obtain a "Digital Terrain Model" (DTM). For aviation purposes a "Digital Surface Model" (DSM) representing the real surface of the earth including all cover like vegetation and buildings is recommended. Due to the characteristics of active remote sensors the derived model always describes an in between of the two elevation representations. To satisfy the special requirements the Institute of Flight Systems and Automatic Control (FSR) at the Technische Universitaet Darmstadt is dealing with the determination of the influencing factors which affect the quality of the terrain models being appropriate to be used as a DSM. In order to enhance the integrity of the data a "safety buffer" is created to allow the applicability for dedicated applications (figure 1).
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. Heidelmeyer and U. Klingauf "Impact of the surface characteristics on the quality of INSAR elevation data", Proc. SPIE 6363, SAR Image Analysis, Modeling, and Techniques VIII, 63630A (9 October 2006); https://doi.org/10.1117/12.689703
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Data modeling

Radar

X band

Safety

Sensors

Interferometric synthetic aperture radar

Reflection

Back to Top