Paper
12 October 2006 Physical parameters identification of nonuniform fiber Bragg gratings using interpolation method
Author Affiliations +
Proceedings Volume 6374, Optomechatronic Actuators, Manipulation, and Systems Control; 63740Y (2006) https://doi.org/10.1117/12.684886
Event: Optics East 2006, 2006, Boston, Massachusetts, United States
Abstract
The Interpolation method for identification of the Apodized and Chirped Fiber Bragg Gratings is used. For this purpose, the Riccati equation for obtaining the reflection coefficient is used and numerically solved. Then for various system parameters, the maximum reflection peaks, bandwidth of the reflection coefficient and the central frequency are determined. Then using interpolation technique, three analytical equations can be extracted for the above-mentioned quantities. Therefore using the obtained reflection coefficient there is a map from the reflection coefficient in frequency domain to real space (index of refraction space). Hence, for the measured reflection coefficient, one can determine the index of refraction profile including Apodized and Chirped functions. The proposed method is effective and can easily determine the index of refraction profile.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Rostami, A. Yazdanpanah, and F. Janabi-Sharifi "Physical parameters identification of nonuniform fiber Bragg gratings using interpolation method", Proc. SPIE 6374, Optomechatronic Actuators, Manipulation, and Systems Control, 63740Y (12 October 2006); https://doi.org/10.1117/12.684886
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Refractive index

Modulation

Refraction

Optical design

Apodization

Integrated optics

Back to Top