Paper
13 October 2006 Gas phase photoacoustic spectroscopy in the long-wave IR using quartz tuning forks and amplitude modulated quantum cascade lasers
Author Affiliations +
Proceedings Volume 6398, Optically Based Biological and Chemical Detection for Defence III; 63980S (2006) https://doi.org/10.1117/12.687044
Event: Optics/Photonics in Security and Defence, 2006, Stockholm, Sweden
Abstract
We demonstrate the performance of a novel long-wave infrared photoacoustic laser absorbance spectrometer for gas-phase species using an amplitude modulated (AM) quantum cascade (QC) laser and a quartz tuning fork microphone. Photoacoustic signal was generated by focusing the output of a Fabry-Perot QC laser operating at 8.41 μm between the legs of a quartz tuning fork which served as a transducer for the transient acoustic pressure wave. The QC laser was modulated at the resonant frequency of the tuning fork (32.8 kHz). This sensor was calibrated using the infrared absorber Freon-134a by performing a simultaneous absorption measurement using a 35 cm absorption cell. The NEAS of this instrument was determined to be (see equation in manuscript), and the fundamental sensitivity of this technique is limited by the noise floor of the tuning fork itself.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael D. Wojcik, Mark C. Phillips, and Bret D. Cannon "Gas phase photoacoustic spectroscopy in the long-wave IR using quartz tuning forks and amplitude modulated quantum cascade lasers", Proc. SPIE 6398, Optically Based Biological and Chemical Detection for Defence III, 63980S (13 October 2006); https://doi.org/10.1117/12.687044
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Acoustics

Sensors

Quantum cascade lasers

Photoacoustic spectroscopy

Modulation

Quartz

Back to Top