Development and applications of an optical tweezer-based microrheometer: case studies of biomaterials and living cells

Jing Wang; Huseyin Yalcin; Angela Lengel; Corey Hewitt; H. Daniel Ou-Yang

doi:10.1117/12.701324

19 February 2007 Development and applications of an optical tweezer-based microrheometer: case studies of biomaterials and living cells

Jing Wang, Huseyin Yalcin, Angela Lengel, Corey Hewitt, H. Daniel Ou-Yang

Author Affiliations +

Proceedings Volume 6441, Imaging, Manipulation, and Analysis of Biomolecules, Cells, and Tissues V; 644112 (2007) https://doi.org/10.1117/12.701324
Event: SPIE BiOS, 2007, San Jose, California, United States

Abstract

The investigation of mechanical properties of living biological cells and biomaterials is challenging because they are inhomogeneous and anisotropic at microscopic scales, and often time-dependent over a broad time scale. Through three case studies of biomaterials and living cells, we demonstrate that a novel, oscillating optical tweezer-based imaging microrheometer developed recently in our laboratory has overcome many technical barriers posed by the complexity of biological systems. In this paper, we present the working principle, system setup and calibration of the imaging microrheometer, and report the groundbreaking results of the three applications: gelation dynamics of cross-linkable hyaluronan acid (HA) hydrogels; Mechanical in-homogeneity and anisotropy in purified microtubule networks; and effects of drug treatment and temperature variation on the mechanical properties of in vitro human alveolar epithelial cells. In each case, micro beads inserted in the materials, or attached to the cell membrane were used as probes for optical trapping. The probe particle was set into a forced harmonic oscillation by oscillating optical tweezers. Position sensing optics and phase lock-in signal processing allow the determination of the amplitude and phase shift of the particle motion at high sensitivity. The complex mechanical modulus G^* is then calculated from the amplitude and the phase shift. The rheometer system is capable of measuring dynamic local mechanical moduli in the broad frequency range of 1.3-1000 Hz at a sampling rate of 2 data point per second across a wide dynamic range (1~20,000 dyne/cm²). Integration of the rheometer system with spinning disk confocal microscopy enables the study of micromechanical properties and the microstructure of the sample simultaneously. Combination of dual-axis, piezo-electric activated mirror and 2-D position sensing detector gives the rheometer system the capability of investigating mechanical anisotropy in highly structured biological samples.

Citation Download Citation

Jing Wang, Huseyin Yalcin, Angela Lengel, Corey Hewitt, and H. Daniel Ou-Yang "Development and applications of an optical tweezer-based microrheometer: case studies of biomaterials and living cells", Proc. SPIE 6441, Imaging, Manipulation, and Analysis of Biomolecules, Cells, and Tissues V, 644112 (19 February 2007); https://doi.org/10.1117/12.701324

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available