Paper
7 March 2007 Pulsed laser ablation for volume fabrication of micro-optical arrays on large-area substrates
Author Affiliations +
Abstract
Laser micromachining by ablation is an established technique for the production of 2.5D and 3D features in a wide variety of materials. Mask projection techniques using excimer lasers have been used to fabricate microstructures on large panels where diamond turning and reflow techniques have reached their limits. We have developed 3D structuring tools based upon UV laser ablation of polymers to create large arrays of repeating micro-optical features. Synchronization of laser pulses with workpiece movement allows layer-by-layer growth of deep structures with outstanding repeatability. Here, we show recent developments in laser structuring with the combination of half-tone and binary mask techniques. Significant improvements in surface quality are demonstrated for a limited range of structures.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. E. A. Pedder, A. S. Holmes, Ric Allott, and Karl Boehlen "Pulsed laser ablation for volume fabrication of micro-optical arrays on large-area substrates", Proc. SPIE 6462, Micromachining Technology for Micro-Optics and Nano-Optics V and Microfabrication Process Technology XII, 64620W (7 March 2007); https://doi.org/10.1117/12.700235
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser ablation

Photomasks

Halftones

Surface roughness

Excimer lasers

Diamond turning

Laser development

RELATED CONTENT

Laser profiling of 3D microturbine blades
Proceedings of SPIE (November 18 2003)
High power excimer laser micromachining
Proceedings of SPIE (March 01 2006)
Excimer laser deep microstructuring for LIGA process
Proceedings of SPIE (August 15 1998)
Excimer laser polymer ablation: the first twenty years
Proceedings of SPIE (September 13 2002)
Micromachining with waveguide excimer lasers
Proceedings of SPIE (April 19 1993)

Back to Top