A scanning system for intelligent imaging: I-ImaS

R. Longo; A. Asimidis; D. Cavouras; C. Esbrand; A. Fant; P. Gasiorek; H. Georgiou; G. Hall; J. Jones; J. Leaver; G. Li; J. Griffiths; D. Machin; N. Manthos; M. Metaxas; M. Noy; J. M. Østby; F. Psomadellis; T. Rokvic; G. Royle; H. Schulerud; R. Speller; PF. van der Stelt; S. Theodoridis; F. Triantis; R. Turchetta; C. Venanzi

doi:10.1117/12.708457

13 March 2007 A scanning system for intelligent imaging: I-ImaS

R. Longo, A. Asimidis, D. Cavouras, C. Esbrand, A. Fant, P. Gasiorek, H. Georgiou, G. Hall, J. Jones, J. Leaver, G. Li, J. Griffiths, D. Machin, N. Manthos, M. Metaxas, M. Noy, J. M. Østby, F. Psomadellis, T. Rokvic, G. Royle, H. Schulerud, R. Speller, PF. van der Stelt, S. Theodoridis, F. Triantis, R. Turchetta, C. Venanzi

Author Affiliations +

Proceedings Volume 6510, Medical Imaging 2007: Physics of Medical Imaging; 65100M (2007) https://doi.org/10.1117/12.708457
Event: Medical Imaging, 2007, San Diego, CA, United States

Abstract

I-ImaS (Intelligent Imaging Sensors) is a European project aiming to produce adaptive x-ray imaging systems using Monolithic Active Pixel Sensors (MAPS) to create optimal diagnostic images. Initial systems concentrate on mammography and cephalography. The on-chip intelligence available to MAPS technology will allow real-time analysis of data during image acquisition, giving the capability to build a truly adaptive imaging system with the potential to create images with maximum diagnostic information within given dose constraints. In our system, the exposure in each image region is optimized and the beam intensity is a function not only of tissue thickness and attenuation, but also of local physical and statistical parameters found in the image itself. Using a linear array of detectors with on-chip intelligence, the system will perform an on-line analysis of the image during the scan and then will optimize the X-ray intensity in order to obtain the maximum diagnostic information from the region of interest while minimizing exposure of less important, or simply less dense, regions. This paper summarizes the testing of the sensors and their electronics carried out using synchrotron radiation, x-ray sources and optical measurements. The sensors are tiled to form a 1.5D linear array. These have been characterised and appropriate correction techniques formulated to take into account misalignments between individual sensors. Full testing of the mammography and cephalography I-ImaS prototypes is now underway and the system intelligence is constantly being upgraded through iterative testing in order to obtain the optimal algorithms and settings.

Citation Download Citation

R. Longo, A. Asimidis, D. Cavouras, C. Esbrand, A. Fant, P. Gasiorek, H. Georgiou, G. Hall, J. Jones, J. Leaver, G. Li, J. Griffiths, D. Machin, N. Manthos, M. Metaxas, M. Noy, J. M. Østby, F. Psomadellis, T. Rokvic, G. Royle, H. Schulerud, R. Speller, PF. van der Stelt, S. Theodoridis, F. Triantis, R. Turchetta, and C. Venanzi "A scanning system for intelligent imaging: I-ImaS", Proc. SPIE 6510, Medical Imaging 2007: Physics of Medical Imaging, 65100M (13 March 2007); https://doi.org/10.1117/12.708457

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE