Effect of acquisition parameters on image quality in digital tomosynthesis

Timothy Deller; Kadri N. Jabri; John M. Sabol; Xianfeng Ni; Gopal Avinash; Rowland Saunders; Renuka Uppaluri

doi:10.1117/12.713777

17 March 2007 Effect of acquisition parameters on image quality in digital tomosynthesis

Timothy Deller, Kadri N. Jabri, John M. Sabol, Xianfeng Ni, Gopal Avinash, Rowland Saunders, Renuka Uppaluri

Author Affiliations +

Proceedings Volume 6510, Medical Imaging 2007: Physics of Medical Imaging; 65101L (2007) https://doi.org/10.1117/12.713777
Event: Medical Imaging, 2007, San Diego, CA, United States

Abstract

Digital tomosynthesis (DTS) is emerging as an advanced imaging technique that enables volumetric slice imaging with a detector typically used for projection radiography. An understanding of the interactions between DTS acquisition parameters and characteristics of the reconstructed slice images is required for optimizing the acquisition protocols of various clinical applications. This paper presents our investigation of the effects and interactions of acquisition parameters, including sweep angle, number of projections, and dose, on clinically relevant image-quality metrics. Metrics included the image characteristics of in-slice resolution, depth resolution, image noise level, and presence of ripple. Phantom experiments were performed to characterize the relationship between the acquisition parameters and image quality. Results showed that the depth resolution was mainly dependent on sweep angle. Visibility of ripple was determined by the projection density (number of projections divided by sweep angle), as well as properties of the imaged object. Image noise was primarily dependent on total dose and not significantly affected by the number of projections. These experimental and theoretical results were confirmed using anthropomorphic phantoms and also used to develop clinical acquisition protocols. Assessment of phantom and clinical images obtained with these protocols revealed that the use of acquisition protocols optimized for a given clinical exam enables rapid, low-dose, high quality DTS imaging for diverse clinical applications including abdomen, hand, shoulder, spine, and chest. We conclude that DTS acquisition parameters have a significant effect on image quality and should be tailored for the imaged anatomy and desired clinical application. Relationships developed in this work will guide the selection of acquisition protocols to improve image quality and clinical utility of DTS for a wide variety of clinical exams.

Citation Download Citation

Timothy Deller, Kadri N. Jabri, John M. Sabol, Xianfeng Ni, Gopal Avinash, Rowland Saunders, and Renuka Uppaluri "Effect of acquisition parameters on image quality in digital tomosynthesis", Proc. SPIE 6510, Medical Imaging 2007: Physics of Medical Imaging, 65101L (17 March 2007); https://doi.org/10.1117/12.713777

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE