Optimization of detector operation and imaging geometry for breast tomosynthesis

Wei Zhao; Bo Zhao; Paul R. Fisher; Patrick Warmoes; Thomas Mertelmeier; Jasmina Orman

doi:10.1117/12.713718

17 March 2007 Optimization of detector operation and imaging geometry for breast tomosynthesis

Wei Zhao, Bo Zhao, Paul R. Fisher, Patrick Warmoes, Thomas Mertelmeier, Jasmina Orman

Author Affiliations +

Proceedings Volume 6510, Medical Imaging 2007: Physics of Medical Imaging; 65101M (2007) https://doi.org/10.1117/12.713718
Event: Medical Imaging, 2007, San Diego, CA, United States

Abstract

In breast tomosynthesis there are tradeoffs between resolution, noise and acquisition speed for a given glandular dose. The purpose of the present work is to investigate the dependence of tomosynthesis imaging performance on system configuration, which includes detector operational modes and image acquisition geometry. A prototype Siemens breast tomosynthesis system with maximum angular range of +/- 25 degrees was used in our investigation. The system was equipped with an amorphous selenium (a-Se) full field digital mammography detector with pixel size of 85µm. The detector can be read out with full resolution or 2x1 binning (binning in the tube travel direction), which increases the image readout rate and decreases the degradation effect of electronic noise. The total number of views can be varied from 11 to 49, and filtered back projection (FBP) method was used to reconstruct the tomosynthesis images. We investigated the effects of detector operational modes (binning) and imaging geometry (view angle and number) on temporal performance and spatial resolution of the projection images. The focal spot blur due to continuous tube travel was measured for different acquisition geometry, and its effect on in-plane presampling modulation transfer function (MTF) was compared to that due to pixel binning. A three-dimensional cascaded linear system model was developed for tomosynthesis to predict the 3D MTF, NPS and DQE. The results were compared with experimental measurements, and reasonable agreement was achieved. The understanding of the relationship between the 3D and projection image quality will lead to optimization of the x-ray spectrum, imaging geometry and reconstruction filters for digital breast tomosynthesis.

Citation Download Citation

Wei Zhao, Bo Zhao, Paul R. Fisher, Patrick Warmoes, Thomas Mertelmeier, and Jasmina Orman "Optimization of detector operation and imaging geometry for breast tomosynthesis", Proc. SPIE 6510, Medical Imaging 2007: Physics of Medical Imaging, 65101M (17 March 2007); https://doi.org/10.1117/12.713718

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE