Analytical cone-beam reconstruction using a multi-source inverse geometry CT system

Zhye Yin; Bruno De Man; Jed Pack

doi:10.1117/12.712883

14 March 2007 Analytical cone-beam reconstruction using a multi-source inverse geometry CT system

Zhye Yin, Bruno De Man, Jed Pack

Author Affiliations +

Proceedings Volume 6510, Medical Imaging 2007: Physics of Medical Imaging; 651021 (2007) https://doi.org/10.1117/12.712883
Event: Medical Imaging, 2007, San Diego, CA, United States

Abstract

In a 3rd generation CT system, a single source projects the entire field of view (FOV) onto a large detector opposite the source. In multi-source CT imaging, a multitude of sources sequentially project a part of the FOV on a much smaller detector. These sources may be distributed in both the trans-axial and axial directions in order to jointly cover the entire FOV. Scan data from multiple sources in the axial direction provide complementary information, which is not available in a conventional single-source CT system. In this work, an analytical 3D cone-beam reconstruction algorithm for multi-source CT is proposed. This approach has three distinctive features. First, multi-source data are re-binned transaxially to multiple offset third-generation datasets. Second, data points in sinograms from multiple source sets are either accepted or rejected for contribution to the backprojection of a given voxel. Third, instead of using a ramp filter, a Hilbert transform is combined with a parallel derivative to form the filtering mechanism. Phantom simulations are performed using a multi-source CT geometry and compared to conventional 3rd generation CT geometry. We show that multi-source CT can extend the axial scan coverage to 120mm without cone-beam artifacts, while a third-generation geometry results in compromised image quality at 60mm of axial coverage. Moreover, given that the cone-angle in the proposed geometry is limited to 7 degrees, there are no degrading effects such as the Heel effect and scattered radiation, unlike in a third-generation geometry with comparable coverage. An additional benefit is the uniform flux profile resulting in uniform image noise throughout the FOV and a uniform dose absorption profile.

Citation Download Citation

Zhye Yin, Bruno De Man, and Jed Pack "Analytical cone-beam reconstruction using a multi-source inverse geometry CT system", Proc. SPIE 6510, Medical Imaging 2007: Physics of Medical Imaging, 651021 (14 March 2007); https://doi.org/10.1117/12.712883

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE