Coupling the use of anti-scatter grid with analytical scatter estimation in cone beam CT

J. Rinkel; L. Gerfault; F. Estève; J.-M. Dinten

doi:10.1117/12.706486

14 March 2007 Coupling the use of anti-scatter grid with analytical scatter estimation in cone beam CT

J. Rinkel, L. Gerfault, F. Estève, J.-M. Dinten

Author Affiliations +

Proceedings Volume 6510, Medical Imaging 2007: Physics of Medical Imaging; 65102E (2007) https://doi.org/10.1117/12.706486
Event: Medical Imaging, 2007, San Diego, CA, United States

Abstract

Cone-Beam Computed Tomography (CBCT) enables three-dimensional imaging with isotropic resolution. X-ray scatter estimation is a big challenge for quantitative CBCT imaging: even in the presence of anti-scatter grid, the scatter level is significantly higher on cone beam systems compared to collimated fan beam systems. The effects of this scattered radiation include cupping artifacts, streaks, and quantification inaccuracies. In this paper, a scatter management process for tomographic projections, without supplementary on-line acquisition, is presented. The scattered radiation is corrected using a method based on scatter calibration through off-line acquisitions. This is combined with on-line analytical transformation based on physical equations, to perform an estimation adapted to the object observed. This approach has been previously applied to a system without anti-scatter grid. The focus of this paper is to show how to combine this approach with an anti-scatter grid. First, the interest of the grid is evaluated in terms of noise to signal ratio and scatter rejection. Then, the method of scatter correction is evaluated by testing it on an anthropomorphic phantom of thorax. The reconstructed volume of the phantom is compared to that obtained with a strongly collimated conventional multi-slice CT scanner. The new method provides results that closely agree with the conventional CT scanner, eliminating cupping artifacts and significantly improving quantification.

Citation Download Citation

J. Rinkel, L. Gerfault, F. Estève, and J.-M. Dinten "Coupling the use of anti-scatter grid with analytical scatter estimation in cone beam CT", Proc. SPIE 6510, Medical Imaging 2007: Physics of Medical Imaging, 65102E (14 March 2007); https://doi.org/10.1117/12.706486

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE