Paper
5 April 2007 Advanced edge roughness measurement application for mask metrology
Author Affiliations +
Abstract
With decreasing Critical Dimensions (CD), the negative influence of line edge roughness (LER) and line-width roughness (LWR) on CD uniformity and mean-to-target CD becomes more pronounced, since there is no corresponding reduction of roughness with dimension reduction. This applies to wafer metrology as well as to mask metrology. In order to better understand the types of roughness as well as the impact of the CD-SEM roughness measurement capabilities on the control of the mask process, the sensitivity and accuracy of the roughness analysis were qualified by comparing the measured mask roughness to the design for a dedicated LER test mask. This comparison is done for different LER amplitude and periodicity values and for reference structures without nominal LER using the built-in CD-SEM algorithms for LER characterization.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas Marschner, Jan Richter, Uwe Dersch, Amit Moran, Ruthy Katz, David Chase, Reuven Falah, and Thomas Coleman "Advanced edge roughness measurement application for mask metrology", Proc. SPIE 6518, Metrology, Inspection, and Process Control for Microlithography XXI, 65181R (5 April 2007); https://doi.org/10.1117/12.712530
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Line edge roughness

Computer aided design

Metrology

Signal processing

Critical dimension metrology

Line width roughness

RELATED CONTENT


Back to Top