Translator Disclaimer
26 April 2007 Characterization of fibre Bragg gratings for temperature and strain sensing
Author Affiliations +
Since their introduction in the mid seventies, a variety of fibre optic sensor configurations have been developed for the measurement of strain, deformation, temperature, vibration, pressure, etc. Variation of these parameters alters the refractive index and the geometric properties of the optical fibre, which in turn perturbs the intensity, phase, or polarization of the light wave propagating in the waveguide. Only in the past decade that Bragg grating-based fibre optic sensors emerged as the non-disputed champion in multiplexing and dual parameter sensing with increased potential for smart structure applications. Stringent requirements for single point discrete or distributed simultaneous strain and temperature measurements prompted this characterization study which has the objective of developing a detailed understanding of grating characteristics and response under external stimuli. Collocated and serially placed gratings were evaluated and tested for their effective sensitivity to strain and temperature and to coating materials variation such as polyamide and acrylite. Experimental sensitivity results correlated well with theoretical estimation for strain in single gratings. Whereas, significant wavelength differential is required for simultaneous temperature and strain measurement if collocated gratings are used.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nezih Mrad, Alexei Ivanov, Jacques Albert, and Gao Zhi (George) Xiao "Characterization of fibre Bragg gratings for temperature and strain sensing", Proc. SPIE 6529, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2007, 65290T (26 April 2007);

Back to Top