Arc-welding process control based on back face thermography: application to the manufacturing of nuclear steam generators

A. Cobo; J. Mirapeix; O. M. Conde; P. B. García-Allende; F. J. Madruga; J. M. López-Higuera

doi:10.1117/12.718949

9 April 2007 Arc-welding process control based on back face thermography: application to the manufacturing of nuclear steam generators

A. Cobo, J. Mirapeix, O. M. Conde, P. B. García-Allende, F. J. Madruga, J. M. López-Higuera

Author Affiliations +

Proceedings Volume 6541, Thermosense XXIX; 65410F (2007) https://doi.org/10.1117/12.718949
Event: Defense and Security Symposium, 2007, Orlando, Florida, United States

Abstract

The possibility of reducing defects in the arc welding process has attracted research interest, particularly, in the aerospace and nuclear sectors where the resulting weld quality is a major concern and must be assured by costly, time-consuming, non-destructive testing (NDT) procedures. One possible approach is the analysis of a measurand correlated with the formation of defects, from which a control action is derived. Among others, the thermographic analysis of the weld pool and the heat-affected zone have proven to be a useful technique, since the temperature profile of the material being welded has a clear correlation with the process parameters. In this paper, we propose a control system for the submerged-arc welding (SAW) process, based on thermographic imaging of the back face of the joint being welded. In-lab experiments, with simultaneous infrared and a visible imaging, have been performed. Two image analysis techniques are proposed: tracking of the maximum temperature point of the infrared images, and morphological analysis of the visible images. In-lab welding experiments have demonstrated the feasibility of both techniques. They are able to obtain an estimation of the surface temperature and to detect the occurrence of the perforation defect, what has major application for defect detection and reduction in the joining of shell sections of nuclear steam generators.

Citation Download Citation

A. Cobo, J. Mirapeix, O. M. Conde, P. B. García-Allende, F. J. Madruga, and J. M. López-Higuera "Arc-welding process control based on back face thermography: application to the manufacturing of nuclear steam generators", Proc. SPIE 6541, Thermosense XXIX, 65410F (9 April 2007); https://doi.org/10.1117/12.718949

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available