Paper
14 May 2007 Fabrication and test of compact high aperture IR telescope lenses for airborne use
M. Esselbach, S. Franz, S. Belke, J. Taubert, H. Lauth, T. Weyh
Author Affiliations +
Abstract
Very long range surveillance and target recognition applications in the infrared spectral range require optical lens systems with large focal length and high numerical aperture optimized for low aberrations and stray light at a working temperature considerably different from the temperature of mounting and adjustment of the system. Additionally, for the airborne use the system shall be rugged, lightweight and compact. These conflicting requirements do not only represent a demanding design task. The much bigger challenges consist in the selection and characterisation of the optical material, in the fabrication and measurement of the particular optical elements, in their integration into the lens system as well as in the characterisation of this lens system and in the verification of its performance parameters. Recent technological approaches developed at JENOPTIK Laser, Optik, Systeme GmbH for the fabrication and the test of such lens systems will be presented in this paper. It will be shown that an iterative combination of manufacturing and measurement techniques is needed for the fabrication of IR lens systems meeting the highest performance requirements.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Esselbach, S. Franz, S. Belke, J. Taubert, H. Lauth, and T. Weyh "Fabrication and test of compact high aperture IR telescope lenses for airborne use", Proc. SPIE 6542, Infrared Technology and Applications XXXIII, 654226 (14 May 2007); https://doi.org/10.1117/12.718571
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Infrared telescopes

Lenses

Optics manufacturing

Infrared imaging

Polishing

Infrared lenses

RELATED CONTENT


Back to Top