Vibration-induced conductivity fluctuation measurement for soil bulk density analysis

Andrea Sz. Kishné; Cristine L. S. Morgan; Hung-Chih Chang; Laszlo B. Kish

doi:10.1117/12.724667

11 June 2007 Vibration-induced conductivity fluctuation measurement for soil bulk density analysis

Andrea Sz. Kishné, Cristine L. S. Morgan, Hung-Chih Chang, Laszlo B. Kish

Proceedings Volume 6600, Noise and Fluctuations in Circuits, Devices, and Materials; 660010 (2007) https://doi.org/10.1117/12.724667
Event: SPIE Fourth International Symposium on Fluctuations and Noise, 2007, Florence, Italy

Abstract

Soil bulk density affects water storage, water and nutrient movement, and plant root activity in the soil profile. Its measurement is difficult in field conditions. Vibration-induced conductivity fluctuation was investigated to quantify soil bulk density with possible field applications in the future. The AC electrical conductivity of soil was measured using a pair of blade-like electrodes while exposing the soil to periodic vibration. The blades were positioned longitudinally and transversally to the direction of the induced vibration to enable the calculation of a normalized index. The normalized index was expected to provide data independent from the vibration strength and to reduce the effect of soil salinity and water content. The experiment was conducted on natural and salinized fine sand at two moisture conditions and four bulk densities. The blade-shaped electrodes improved electrode-soil contact compared to cylindrical electrodes, and thereby, reduced measurement noise. Simulations on a simplified resistor lattice indicate that the transversal effect increases as soil bulk density decreases. Measurement of dry sand showed a negative correlation between the normalized conductivity fluctuation and soil bulk density for both longitudinal and transversal settings. The decrease in the transversal signal was smaller than expected. The wet natural and salinized soils performed very similarly as hypothesized, but their normalized VICOF response was not significant to bulk density changes. This lack of sensitivity might be attributed to the heavy electrodes and/or the specific vibration method used. The effects of electrode material, vibration method and soil properties on the experiment need further study.

Citation Download Citation

Andrea Sz. Kishné, Cristine L. S. Morgan, Hung-Chih Chang, and Laszlo B. Kish "Vibration-induced conductivity fluctuation measurement for soil bulk density analysis", Proc. SPIE 6600, Noise and Fluctuations in Circuits, Devices, and Materials, 660010 (11 June 2007); https://doi.org/10.1117/12.724667

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Soil science

Electrodes

Resistors

Resistance

Modulation

Computer simulations

Error analysis

Show All Keywords

Keywords/Phrases

Search In:

Publication Years