Polarized transmittance-reflectance scatterometry measurements of 2D trench dimensions on phase-shift masks

John C. Lam; Alexander Gray; Rafael Howell; Stanley Chen

doi:10.1117/12.728949

14 May 2007 Polarized transmittance-reflectance scatterometry measurements of 2D trench dimensions on phase-shift masks

John C. Lam, Alexander Gray, Rafael Howell, Stanley Chen

Proceedings Volume 6607, Photomask and Next-Generation Lithography Mask Technology XIV; 660710 (2007) https://doi.org/10.1117/12.728949
Event: Photomask and Next-Generation Lithography Mask Technology XIV, 2007, Yokohama, Japan

Abstract

For the first time, polarized broadband transmittance (T) plus reflectance (R) measurements, combined with the Rigorous Coupled-Wave Analysis (RCWA) and the Forouhi-Bloomer dispersion equations for n and k, were used to measure 2D trench dimensions. This is in contrast to traditional scatterometry, which is based on reflectance-only measurements. T and R were measured from 190 to 1000 nm in one-nanometer intervals. Inclusion of the transmittance measurements proved to be advantageous, because there is a greater sensitivity of the T spectra to the sub-nanometer structural and/or material variations, which are difficult to detect with R-only measurements. Furthermore, the intensity of T is much higher than the intensity of R, resulting in a much improved signal-to-noise ratio, since intensity is proportional to number of photons reaching the detector, which in turn is proportional to the signal. Thus, the higher the intensity, the higher the signal-to-noise, and the better the repeatability and reproducibility of the results. For the current study, 2D arrays of square and circular contact holes of various pitches were measured on an After-Clean-Inspection (ACI) phase-shift mask, using a spectrophotometer-based instrument, capable of collecting four continuous spectra during one measurement - two polarized reflectance spectra (R_s and R_p) and two polarized transmittance spectra (T_s and T_p). The measured spectra were analyzed using the Forouhi-Bloomer dispersion equations, in conjunctions with RCWA algorithm, applied simultaneously to R and T polarized spectra. The method provided accurate and repeatable results for contact hole depths, critical dimensions film thicknesses and n and k spectra. High-resolution uniformity maps were obtained for all the parameters mentioned above.

Citation Download Citation

John C. Lam, Alexander Gray, Rafael Howell, and Stanley Chen "Polarized transmittance-reflectance scatterometry measurements of 2D trench dimensions on phase-shift masks", Proc. SPIE 6607, Photomask and Next-Generation Lithography Mask Technology XIV, 660710 (14 May 2007); https://doi.org/10.1117/12.728949

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available