Automated aerial image based CD metrology initiated by pattern marking with photomask layout data

Grant Davis; Sun Young Choi; Eui Hee Jung; Arne Seyfarth; Hans van Doornmalen; Eric Poortinga

doi:10.1117/12.728993

25 May 2007 Automated aerial image based CD metrology initiated by pattern marking with photomask layout data

Grant Davis, Sun Young Choi, Eui Hee Jung, Arne Seyfarth, Hans van Doornmalen, Eric Poortinga

Proceedings Volume 6607, Photomask and Next-Generation Lithography Mask Technology XIV; 66072A (2007) https://doi.org/10.1117/12.728993
Event: Photomask and Next-Generation Lithography Mask Technology XIV, 2007, Yokohama, Japan

Abstract

The photomask is a critical element in the lithographic image transfer process from the drawn layout to the final structures on the wafer. The non-linearity of the imaging process and the related MEEF impose a tight control requirement on the photomask critical dimensions. Critical dimensions can be measured in aerial images with hardware emulation. This is a more recent complement to the standard scanning electron microscope measurement of wafers and photomasks. Aerial image measurement includes non-linear, 3-dimensional, and materials effects on imaging that cannot be observed directly by SEM measurement of the mask. Aerial image measurement excludes the processing effects of printing and etching on the wafer. This presents a unique contribution to the difficult process control and modeling tasks in mask making. In the past, aerial image measurements have been used mainly to characterize the printability of mask repair sites. Development of photomask CD characterization with the AIMS^TM tool was motivated by the benefit of MEEF sensitivity and the shorter feedback loop compared to wafer exposures. This paper describes a new application that includes: an improved interface for the selection of meaningful locations using the photomask and design layout data with the Calibre^TM Metrology Interface, an automated recipe generation process, an automated measurement process, and automated analysis and result reporting on a Carl Zeiss AIMS^TM system.

Citation Download Citation

Grant Davis, Sun Young Choi, Eui Hee Jung, Arne Seyfarth, Hans van Doornmalen, and Eric Poortinga "Automated aerial image based CD metrology initiated by pattern marking with photomask layout data", Proc. SPIE 6607, Photomask and Next-Generation Lithography Mask Technology XIV, 66072A (25 May 2007); https://doi.org/10.1117/12.728993

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available