Non-contact torsion transducer based on the measurement of Moire patterns using plastic optical fibres

Mauro Lomer; Kevin Contreras

doi:10.1117/12.726326

Translator Disclaimer

18 June 2007 Non-contact torsion transducer based on the measurement of Moire patterns using plastic optical fibres

Mauro Lomer, Kevin Contreras

Author Affiliations +

Proceedings Volume 6616, Optical Measurement Systems for Industrial Inspection V; 66161N (2007) https://doi.org/10.1117/12.726326
Event: Optical Metrology, 2007, Munich, Germany

Abstract

An angular and displacement sensor that uses a polymer optical fiber and Moire patterns is demonstrated. Moire fringes are generated using two transparent superimposed planar gratings placed in front of an optical mirror. Moire patterns with periods ranging from 0.4 to 2 mm have been obtained in this way with 1mm-diameter plastic optical fibers for torsion angles ranging from 10° to 20° have been compared with theoretical calculations and a good agreement has been confirmed. Measuring the period length and the number of periods, both the relative angle between the gratings and the displacement of the fiber with respect to the mirror are obtained. With this technique very low angles can be measured with a very high resolution. The sensor principle has been successfully checked in the laboratory. Finally, the effect of employing different plastic fibers is also discussed. Besides, other possible applications of this measurement technique are presented and discussed.

Citation Download Citation

Mauro Lomer and Kevin Contreras "Non-contact torsion transducer based on the measurement of Moire patterns using plastic optical fibres", Proc. SPIE 6616, Optical Measurement Systems for Industrial Inspection V, 66161N (18 June 2007); https://doi.org/10.1117/12.726326

ACCESS THE FULL ARTICLE