Improving the measurement of thick and thin films with optical profiling techniques

Cristina Cadevall; Carles Oriach-Font; Roger Artigas; Agustí Pintó; Ferran Laguarta

doi:10.1117/12.726187

18 June 2007 Improving the measurement of thick and thin films with optical profiling techniques

Cristina Cadevall, Carles Oriach-Font, Roger Artigas, Agustí Pintó, Ferran Laguarta

Proceedings Volume 6616, Optical Measurement Systems for Industrial Inspection V; 66161Z (2007) https://doi.org/10.1117/12.726187
Event: Optical Metrology, 2007, Munich, Germany

Abstract

Optical profiling techniques, mainly confocal and white light interferometry, have demonstrated to be suitable techniques for characterization of transparent thick films. Measurements are carried out by vertically scanning the upper and lower film interfaces. Thickness of the layer is determined from the two peaks in the confocal axial response or from the two sets of interference fringes developed during the vertical scan. The 3D topographies of the upper and lower interfaces of the film can also be obtained. Measurements of photoresists or oxide coatings are typical examples of thick film characterization. On the other hand, measurement of thin films is considered to be a very difficult application to carry out with most optical imaging profilers. A film should be considered as thin when the two peaks obtained along the vertical scan become unresolved. We introduce new methods based on confocal techniques, which make it possible to measure sub-micrometric layers on structured samples. These techniques are based on the comparison between the axial responses obtained in areas where the film is present and those in other areas where only the substrate is present. This method has been successfully used for thickness assessment of several samples, such as a set of calibrated Si-SiO₂ layers.

Citation Download Citation

Cristina Cadevall, Carles Oriach-Font, Roger Artigas, Agustí Pintó, and Ferran Laguarta "Improving the measurement of thick and thin films with optical profiling techniques", Proc. SPIE 6616, Optical Measurement Systems for Industrial Inspection V, 66161Z (18 June 2007); https://doi.org/10.1117/12.726187

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available