Paper
2 July 2007 Design of a multi-wavelength fibre laser using an intra-cavity phase modulator and Sagnac loop filter for sensor applications
M. A. Mirza, G. Stewart
Author Affiliations +
Proceedings Volume 6619, Third European Workshop on Optical Fibre Sensors; 66192K (2007) https://doi.org/10.1117/12.738637
Event: Third European Workshop on Optical Fibre Sensors, 2007, Napoli, Italy
Abstract
This paper describes the design of an all-fibre multiwavelength erbium doped fibre laser operating at room temperature. By using a Sagnac loop filter, multiple wavelength channels are obtained with 0.8nm spacing in the C-band and simultaneous multiwavelength operation is achieved through an intracavity sinusoidal phase modulator. A polarization controller inside the filter is helpful in controlling the multiwavelength operation. The effects of modulation frequency, modulation index and pump power on the multiwavelength operation are experimentally investigated. The fibre laser has potential applications in fibre Bragg grating sensors and fibre optic spectroscopy.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. A. Mirza and G. Stewart "Design of a multi-wavelength fibre laser using an intra-cavity phase modulator and Sagnac loop filter for sensor applications", Proc. SPIE 6619, Third European Workshop on Optical Fibre Sensors, 66192K (2 July 2007); https://doi.org/10.1117/12.738637
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical amplifiers

Modulation

Modulators

Sensors

Fiber lasers

Optical filters

Ferroelectric materials

Back to Top