Translator Disclaimer
Paper
19 February 2008 Study of optical fiber carbon monoxide gas sensor with DFB LD
Author Affiliations +
Proceedings Volume 6625, International Symposium on Photoelectronic Detection and Imaging 2007: Related Technologies and Applications; 66251Y (2008) https://doi.org/10.1117/12.791236
Event: International Symposium on Photoelectronic Detection and Imaging: Technology and Applications 2007, 2007, Beijing, China
Abstract
Based on the near-infrared absorption theory, a new carbon monoxide concentration measurement system is devised. The near-infrared absorption line of carbon monoxide is chosen as the measured spectrum and a distributed feed-back laser diode (DFBLD) is used as the light source. The wavelength of the light source is locked at the carbon monoxide gas absorptive peak which is chosen at 1.567μm by light source modulation technology, and the signals are processed by lock-in amplifier. The ratio of the second-harmonic to fundamental signal is used as the output of the system to eliminate optical interference. Optical fiber is used as transmission medium, instead of traditional complex optical system, so the structure of the system would become miniaturization. Proved by examinations, high measurement sensitivity of carbon monoxide gas can be achieved in this study.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Longjiang Zheng, Xinyan Huang, and Genfeng Bi "Study of optical fiber carbon monoxide gas sensor with DFB LD", Proc. SPIE 6625, International Symposium on Photoelectronic Detection and Imaging 2007: Related Technologies and Applications, 66251Y (19 February 2008); https://doi.org/10.1117/12.791236
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
Back to Top