Textured, doped, ZnO thin films produced by a new process for a-Si and CIGS solar cell application

S. Y. Guo; L. Sahoo; G. Sosale; A. E. Delahoy

doi:10.1117/12.736084

11 September 2007 Textured, doped, ZnO thin films produced by a new process for a-Si and CIGS solar cell application

S. Y. Guo, L. Sahoo, G. Sosale, A. E. Delahoy

Proceedings Volume 6651, Photovoltaic Cell and Module Technologies; 66510B (2007) https://doi.org/10.1117/12.736084
Event: Solar Energy + Applications, 2007, San Diego, California, United States

Abstract

The properties of a transparent conductive oxide (TCO) used as a front electrode for thin-film solar cells and modules play a major role in determining the maximum attainable conversion efficiency. Doped ZnO is an important TCO that is widely used in amorphous/nanocrystalline silicon (a-Si/nc-Si) and CIGS thin-film solar cells. In the case of a-Si/nc-Si cells, the ZnO thin film should be textured to promote light trapping to increase the short-circuit current density J_sc. In this work, textured, aluminum-doped ZnO (ZnO:Al) thin films have been directly deposited by a sputtering-based method and without the need for post-deposition etching. The morphology, optical properties and electrical properties of the films have been studied. SEM micrographs show that feature sizes around 0.2 - 0.4μm have been achieved at a film thickness of 1μm, and that the morphology can be controlled by the deposition conditions. AFM images were analyzed to extract a set of topographic parameters (amplitude, spatial, and hybrid). The optical transmission, haze, and angle-resolved light scattering of the textured ZnO:Al films were measured and compared to properties of commercially-available textured SnO₂:F thin films on glass. Higher haze and reduced absorption could be obtained with the textured ZnO:Al films. Hall effect measurements on these films yielded a carrier concentration and mobility of 2.75 x 10²⁰cm^-3 and 24.1cm²/Vs, respectively. We also report that the use of these textured ZnO:Al films as the top TCO for CIGS solar cells results in reduced cell reflectance and increased J_sc. The novel deposition method provides a potential pathway to large area and cost effective production of a textured ZnO TCO for thin-film PV manufacturing operations.

Citation Download Citation

S. Y. Guo, L. Sahoo, G. Sosale, and A. E. Delahoy "Textured, doped, ZnO thin films produced by a new process for a-Si and CIGS solar cell application", Proc. SPIE 6651, Photovoltaic Cell and Module Technologies, 66510B (11 September 2007); https://doi.org/10.1117/12.736084

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available