Paper
10 September 2007 MEMS tunable silicon Fabry-Perot cavity
Jonathan Masson, Fatou Binetou Koné, Yves-Alain Peter
Author Affiliations +
Proceedings Volume 6717, Optomechatronic Micro/Nano Devices and Components III; 671705 (2007) https://doi.org/10.1117/12.754325
Event: International Symposium on Optomechatronic Technologies, 2007, Lausanne, Switzerland
Abstract
In this paper we present an innovative tunable Fabry-Perot cavity micromachined in silicon. A short summary of the theoretical background of these filters is presented, followed by technical requirements for the design of the dielectric mirror composing the Fabry-Perot cavity and the cavity itself. Simulations and experimental data are demonstrated to be in good agreement. An in plane design is used to allow easy fiber alignment. The Fabry-Perot is tuned by an electrostatic comb drive actuator supported by a set of four springs to achieve a uniform modulation of the air gap of the filter. Only 15.4 V are required to tune the Fabry-Perot over 73nm bandwidth (covering more than the whole C-band) with a FWHM varying from 6 to 10nm. Transmission losses are -11dB.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jonathan Masson, Fatou Binetou Koné, and Yves-Alain Peter "MEMS tunable silicon Fabry-Perot cavity", Proc. SPIE 6717, Optomechatronic Micro/Nano Devices and Components III, 671705 (10 September 2007); https://doi.org/10.1117/12.754325
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications and 3 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Fabry–Perot interferometers

Reflectors

Mirrors

Etching

Reflectivity

Deep reactive ion etching

Back to Top