Application of modified jog-fill DRC rule on LFD OPC flow

Young-Mi Kim; Sang-Uk Lee; Jea-Hyun Kang; Jea-Hee Kim; Kee-Ho Kim

doi:10.1117/12.746811

1 November 2007 Application of modified jog-fill DRC rule on LFD OPC flow

Young-Mi Kim, Sang-Uk Lee, Jea-Hyun Kang, Jea-Hee Kim, Kee-Ho Kim

Author Affiliations +

Proceedings Volume 6730, Photomask Technology 2007; 67303W (2007) https://doi.org/10.1117/12.746811
Event: SPIE Photomask Technology, 2007, Monterey, California, United States

Abstract

The methodology of lithography friendly design (LFD) has been widely adopted since it dramatically reduces cycle of design revision as well as number of learning cycles to reach acceptable yield. LFD is, for example, the reduction number of small jogs and notches in original, pre-OPC layouts. We can call them as OPC-unfriendly patterns since they create unnecessarily complicated OPC patterns. They usually meet design rule so that DRC does not detect or screen them out. Also, they make many errors after OPC because OPC model recognizes just as one of small features that it should care. This generates many false alarms at OPC verification and mask rule check. General approach to implement LFD is to update rule table or design rule by taking actual yield and failure analysis data into consideration of database handling flow. Another method is the utilization of simulation to predict lithography unfriendly designs. It takes time to setup excellent rule for accurate prediction even if they are very good approach as fundamental solution for LFD. It will be better to have a simple solution with fast setup and improvement on major lithography unfriendly designs such as small jogs and notches. In this paper, we proposed new type of LFD flow which is the application of modified DRC step on LFD flow. This modified DRC identifies OPC-unfriendly patterns, and changes to "OPC-friendly" as well as fixing design rule violations. It is a pre-OPC layout treatment to remove small jogs and notches. After finding small jogs or notches, DRC software removes jogs and notches. In this case, unnecessary OPC fragments could be avoided. Using this jog-fill technique, we can dramatically reduce the incidence of necking or bridging, improve contact coverage, and, as a result, it enhances the final yield and reliability of circuit.

Citation Download Citation

Young-Mi Kim, Sang-Uk Lee, Jea-Hyun Kang, Jea-Hee Kim, and Kee-Ho Kim "Application of modified jog-fill DRC rule on LFD OPC flow", Proc. SPIE 6730, Photomask Technology 2007, 67303W (1 November 2007); https://doi.org/10.1117/12.746811

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE