Paper
25 September 2007 Improved electrochemical biosensor response via metal oxide pre-oxidation of chemical interferents
Jamie G. Houseknecht, Mark A. Tapsak
Author Affiliations +
Abstract
Typical biological samples are inherently complicated. They may contain a myriad of compounds that are electroactive at the same potential as that used in many electrochemical biosensors. Therefore, a biosensor design feature must be included that either eliminates or blocks the interferents from generating false positive signals. The ability to use an insoluble compound, that of MnO2, in order to oxidize interferents such as ascorbic acid, acetaminophen and uric acid, was investigated in a prototype sensor system at a bias potential of 0.6 V versus Ag/AgCl. Unlike previous work with these materials, a difference between the ability for the metal oxide to oxidize the interferents was observed. Most effective was the capability of MnO2 to oxidize uric acid. Alternatively, the MnO2 had little effect on acetaminophen. The study is both introduced and results are discussed within the context of an implantable glucose sensor.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jamie G. Houseknecht and Mark A. Tapsak "Improved electrochemical biosensor response via metal oxide pre-oxidation of chemical interferents", Proc. SPIE 6769, Nanosensing: Materials, Devices, and Systems III, 67690I (25 September 2007); https://doi.org/10.1117/12.752637
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Biosensors

Sensors

Glucose

Oxides

Hydrogen

Electrodes

Magnesium

Back to Top