High frequency Pound-Drever-Hall sensing of ring resonator cavities

J. Paul Chambers; Christi K. Madsen; Haiqiao Lin

doi:10.1117/12.752607

12 October 2007 High frequency Pound-Drever-Hall sensing of ring resonator cavities

J. Paul Chambers, Christi K. Madsen, Haiqiao Lin

Proceedings Volume 6770, Fiber Optic Sensors and Applications V; 67700W (2007) https://doi.org/10.1117/12.752607
Event: Optics East, 2007, Boston, MA, United States

Abstract

This paper establishes a procedure for increasing the sensitivity of measurements in integrated ring resonators beyond what has been previously accomplished. This is achieved by a high-frequency phase modulation lock to the ring cavities. A prototyped fiber Fabry-Perot cavity is used for comparison of the method to a similar cavity. The Pound-Drever-Hall (PDH) method is chosen as a proven, ultra-sensitive method with the exploration of a much higher frequency modulation than has been previously discussed to overcome comparatively low finesse of the ring resonator cavities. The high frequency facilitates the use of the same modulation signal to separately probe the phase information of different, integrated ring resonators with quality factors of 5.6 x10⁵ and 2.4 x10⁵. The large free spectral range of small cavities and low finesse provide a challenge to sensing and locking the stability of diode lasers due to the small dynamic range and signal-to-noise ratios (S/N). This can be offset by a calculated increase in modulation frequency using the PDH approach. A distributed feedback (DFB) laser is locked to a ring resonator cavity to demonstrate this sensitivity. This approach using integrated ring resonators is measured to have a refractive index resolution of 1.9x10^-8 that can be compared to other fiber and integrated sensors. The relationship between the signal-to-noise ratio and dynamic frequency range of the cavity error signal is explored with an algorithm to optimize this relationship. The free spectral range and the loss of the cavity provide input parameters to this relationship to determine the optimum S/N and range of the respective cavities used for locking and sensing. The purpose is to show how future contributions to the measurements and experiments of micro-cavities, specifically ring resonators, is well-served by the PDH method with high-frequency modulation.

Citation Download Citation

J. Paul Chambers, Christi K. Madsen, and Haiqiao Lin "High frequency Pound-Drever-Hall sensing of ring resonator cavities", Proc. SPIE 6770, Fiber Optic Sensors and Applications V, 67700W (12 October 2007); https://doi.org/10.1117/12.752607

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available