Low-cost electro-optical package for use with PCB-embedded waveguides

Jonas Weiss; Christoph Berger; Martin Witzig; Thomas Morf; Roger Dangel; Folkert Horst; Martin Schmatz

doi:10.1117/12.733739

10 September 2007 Low-cost electro-optical package for use with PCB-embedded waveguides

Jonas Weiss, Christoph Berger, Martin Witzig, Thomas Morf, Roger Dangel, Folkert Horst, Martin Schmatz

Proceedings Volume 6775, Active and Passive Optical Components for Communications VII; 677507 (2007) https://doi.org/10.1117/12.733739
Event: Optics East, 2007, Boston, MA, United States

Abstract

We present a novel approach for packaging high-speed opto-electronic 12x-array devices in a compact, low-cost package for waveguide-based intra-system links. In order to avoid optical signal loss and crosstalk, the mutual alignment between PCB-embedded multimode waveguides and the opto-electronic components needs to be in the order of 5-10 micrometer, which is an order of magnitude tighter than standard PCB manufacturing tolerances. Our packaging concept uses a combination of passive alignment steps, tolerance stackup reduction and a misalignment-tolerant coupling scheme in order to bridge this gap in a cost competitive way. Using flip-chip technology, the opto-electronic components are placed onto a very thin substrate with holes for the light path. The top side of the 25 μm liquid crystal polymer (LCP) substrate not only provides fast and low-loss electrical connections, but also serves as alignment reference plane for the entire module, avoiding alignment tolerance accumulation over different assembly steps. Openings for the laser beams, passive lens alignment features, centering holes for mechanical alignment pins between module and board and optional MT-guide receptacles are all laser-cut within one single process step, with a precision better than 5 μm. A similar approach is used for the PCB-side optics, and a lens-pair coupling scheme provides for a sufficiently large misalignment tolerance between the package and the PCB. Mechanical rigidity of the package and thermal protection are provided by an epoxy filled aluminum frame. We will present our design considerations, the basic package concept, the actual experimental implementation and characterization results of our first prototype package.

Citation Download Citation

Jonas Weiss, Christoph Berger, Martin Witzig, Thomas Morf, Roger Dangel, Folkert Horst, and Martin Schmatz "Low-cost electro-optical package for use with PCB-embedded waveguides", Proc. SPIE 6775, Active and Passive Optical Components for Communications VII, 677507 (10 September 2007); https://doi.org/10.1117/12.733739

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available