Translator Disclaimer
8 January 2008 A transmit reflect detection system for fiber Bragg grating photonic sensors
Author Affiliations +
Traditional Fibre Bragg Grating (FBG) sensing systems acquire data about the measurand via the spectral response of the FBG. Edge filter methods are also used in the acquisition of data from FBGs. In edge filter systems, the spectral shift in the FBG due to the measurand is converted into an optical power change. This optical power change can then be easily measured using conventional optoelectronic devices. We demonstrate the use of a Transmit Reflect Detection System (TRDS) for Fibre Bragg Grating (FBG) sensors. The TRDS is in essence a dual edge filter detection method. In conventional edge filter detection schemes, the reflected portion of the incident spectrum is monitored to determine the change in the measurand. In the TRDS, both the transmitted and reflected portions of the input spectrum, from a narrow band light source, are utilised. The optical power of the transmitted and reflected signals are measured via two separate photoreceivers, where each generates a single edge filter signal. As the spectral response of the FBG shifts due to the measurand, the transmitted power will increase, and the reflected power will decrease, or vice versa. By differentially amplifying the transmitted and reflected components, the overall signal is increased. This results in improved sensitivity and efficiency of the photonic sensor. In this work, the FBG sensor and TRDS are used in the measuring and monitoring of temperature, force and strain. As such, results are presented for the FBG TRDS for all of the measurands.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Graham Wild, Steven Hinckley, and Paul Jansz "A transmit reflect detection system for fiber Bragg grating photonic sensors", Proc. SPIE 6801, Photonics: Design, Technology, and Packaging III, 68010N (8 January 2008);

Back to Top