Paper
11 January 2008 Study of a new type anode of OLED by MIC poly-Si
Yang Li, Zhiguo Meng, Chunya Wu, Wong Man, Kwok Sing Hoi, Shaozhen Xiong
Author Affiliations +
Abstract
In this paper, a boron-doped poly-Si crystallized by solution-based metal induced (S-MIC) as the anode of organic light emitting diode (OLED) was studied. The semi-transparent and semi-reflective anode of OLED systemized with the high reflectivity of Al cathode could form a micro-cavity structure with a low Q to improve the efficiency. The maximum luminance efficiency of red OLED made by Alq3: DCJTB (1.5wt %)( 30nm) with the poly-Si anode is 2.66cd/A, higher than that of the OLED with the ITO anodes by 30%. In order to improve the device performance, some key to optimize the character of MIC poly-Si thin film are analyzed theoretically. A new kind of TFT/OLED coupling structure in AMOLED was proposed, in which the pixel electrode of OLED was made by the same poly-Si thin film with its driver TFT's drain electrode. So that this coupling structure will simplify the AMOLED processes flow.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yang Li, Zhiguo Meng, Chunya Wu, Wong Man, Kwok Sing Hoi, and Shaozhen Xiong "Study of a new type anode of OLED by MIC poly-Si", Proc. SPIE 6828, Light-Emitting Diode Materials and Devices II, 68280J (11 January 2008); https://doi.org/10.1117/12.755602
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Organic light emitting diodes

Thin films

Crystals

Electrodes

Reflection

Reflectivity

Silicon films

Back to Top