Paper
24 January 2008 Signal processing methods in a single-photon counting system
Author Affiliations +
Abstract
Single-photon counting technology has been used extensively in testing due to its powerful quantitative performance for ultraweak luminescence intensity such as high time resolution and large dynamic range. However, some negative factors limit its performance in practice. In this work, the methods for weak signal detection and self-fitting noise suppression were applied to the signal processing in the single-photon counting system in which a photomultiplier tube (PMT) was the photoelectric sensor. Firstly, the weak signal from PMT was amplified by two stage amplifiers and subtracted by its means. And then the lost pluses were corrected by double discriminating voltages as different peaks' circumscriptions. Lastly it was proposed to put program-controlled auto compensation function for self-adjusting ability and high sensitivity. By these methods, the measure errors caused by narrow pulse interval and double-photons peak are decreased whilst the counting efficiency is increased. It was demonstrated that the performance of the single-photon counting system, in which signals were processed with the proposed methods, was enhanced and the system was more flexible in terms of self-fitting measuring.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yanping Chen, Min Du, and Rui Li "Signal processing methods in a single-photon counting system", Proc. SPIE 6829, Advanced Materials and Devices for Sensing and Imaging III, 68291A (24 January 2008); https://doi.org/10.1117/12.754318
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal processing

Amplifiers

Interference (communication)

Luminescence

Signal detection

Sensors

Signal to noise ratio

Back to Top