Paper
28 November 2007 Study of CAD-based laser guiding measurement technology
Yonggang Yan, Jianfei Ouyang, Wanli Liu, Fei Xia
Author Affiliations +
Abstract
The laser Guiding Measurement Robot (LGMR) technology is based on the measurement method "laser beam moving, Spherical Mounted Retro-reflector (SMR) tracking", which uses CAD model to control the position and attitude signals of measuring laser beam that guides the robot carrying SMR to the required position to complete the measurement of the objects together with a laser tracker. It is a key technology to be studied deeply how the CAD model is converted into the signals, which can make laser beam scan and guide the device with SMR to move to the required position. This paper describes the research work to the development of an optical guidance system for CMM with SMR by use of the CAD model of a completed object. The working principle and structure of LGMR are presented firstly. Then the method converting the CAD model to signals is studied successfully. Next, the guidance system employs the signals to make laser beam point to the required position and guide the CMM with SMR to the position at the same time. Finally, the experiment is carried out to prove the correctness of the methodology. The results show the maximum error of the measured curve is 0.12mm.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yonggang Yan, Jianfei Ouyang, Wanli Liu, and Fei Xia "Study of CAD-based laser guiding measurement technology", Proc. SPIE 6834, Optical Design and Testing III, 68343D (28 November 2007); https://doi.org/10.1117/12.757466
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser applications

Solid modeling

Computer aided design

Mathematical modeling

3D modeling

Data modeling

Computing systems

RELATED CONTENT

Solid modeling in GEMS 4.0
Proceedings of SPIE (March 22 1996)
Geometric compression with predictable compression ratio
Proceedings of SPIE (December 27 2000)
Study of laser guided measurement robot
Proceedings of SPIE (August 04 2009)
A visual tracking system using an RFID tag
Proceedings of SPIE (January 17 2005)

Back to Top