Paper
18 February 2008 In vivo imaging and vibration measurement of Guinea pig cochlea
Niloy Choudhury, Fangyi Chen, Jiefu Zheng, Alfred L. Nuttall, Steven L. Jacques
Author Affiliations +
Abstract
An optical coherence tomography (OCT) system was built to acquire in vivo, both images and vibration measurements of the organ of Corti of the guinea pig. The organ of Corti was viewed through a ~500-μm diameter hole in the bony wall of the scala tympani of the first cochlear turn. In imaging mode, the image was acquired as reflectance R(x,z). In vibration mode, the basilar membrane (BM) or reticular lamina (RL) was selected based on the image. Under software control, the system would move the scanning mirrors to bring the sensing volume of the measurement to the desired tissue location. To address the gain stability problem of the homodyne OCT system, arising from the system moving in and out of the quadrature point and also to resolve the 180 degree ambiguity in the phase measurement using an interferometer, a vibration calibration method is developed by adding a vibrating source to the reference arm to monitor the operating point of the interferometric system. Amplitude gain and phase of various cochlear membranes was measured for different sound pressure level (SPL) varying from 65dB SPL to 93 dB SPL.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Niloy Choudhury, Fangyi Chen, Jiefu Zheng, Alfred L. Nuttall, and Steven L. Jacques "In vivo imaging and vibration measurement of Guinea pig cochlea", Proc. SPIE 6847, Coherence Domain Optical Methods and Optical Coherence Tomography in Biomedicine XII, 68471V (18 February 2008); https://doi.org/10.1117/12.764663
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical coherence tomography

Phase measurement

Interferometry

Reflectivity

Scanning probe lithography

Vibrometry

In vivo imaging

Back to Top