Paper
26 March 2008 Resist development to improve flare issue of EUV lithography
Makiko Irie, Takako Suzuki, Takeyoshi Mimura, Takeshi Iwai
Author Affiliations +
Abstract
This report will introduce novel resist materials including specific photo acid generator (PAG) to improve flare issue from the resist standpoint. We have developed a method to control the acid diffusion length from the PAG. It previously reported that acid diffusion length can be altered by the PAG anion size. In this report, we focused on the effect of the Tg of a resist film. The thermal flow rate of a resist film can suggest the approximate resist Tg. Therefore, we measured the thermal flow rate of the resist. And we found out passivity of acid diffusion control by changing PAG species and volume. Moreover, newly designed PAG tested was confirmed to have uniform distribution in the resist film with no PAG clustering at the resist surface at compared to our conventional PAG. This new positive tone resist formulation shows good performance under flare condition. In addition, we focused on the pattern density variation as one of the key parameters for flare value. Low pattern density indicated less flare value. It is considered that negative tone resist to have advantage for isolated line type features. Novel positive and negative tone type resists were compared side-by-side and discussed for its advantages at varying pattern densities.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Makiko Irie, Takako Suzuki, Takeyoshi Mimura, and Takeshi Iwai "Resist development to improve flare issue of EUV lithography", Proc. SPIE 6923, Advances in Resist Materials and Processing Technology XXV, 692310 (26 March 2008); https://doi.org/10.1117/12.771120
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Diffusion

Polymers

Extreme ultraviolet lithography

Polymer thin films

Manufacturing

Semiconducting wafers

Back to Top