The comparison of OPC performance and run time for dense versus sparse solutions

Amr Abdo; Ian Stobert; Ramya Viswanathan; Ryan Burns; Klaus Herold; Chidam Kallingal; Jason Meiring; James Oberschmidt; Scott Mansfield

doi:10.1117/12.772902

2 April 2008 The comparison of OPC performance and run time for dense versus sparse solutions

Amr Abdo, Ian Stobert, Ramya Viswanathan, Ryan Burns, Klaus Herold, Chidam Kallingal, Jason Meiring, James Oberschmidt, Scott Mansfield

Author Affiliations +

Proceedings Volume 6924, Optical Microlithography XXI; 69243G (2008) https://doi.org/10.1117/12.772902
Event: SPIE Advanced Lithography, 2008, San Jose, California, United States

Abstract

The lithographic processes and resolution enhancement techniques (RET) needed to achieve pattern fidelity are becoming more complicated as the required critical dimensions (CDs) shrink. For technology nodes with smaller devices and tolerances, more complex models and proximity corrections are needed and these significantly increase the computational requirements. New simulation techniques are required to address these computational challenges. The new simulation technique we focus on in this work is dense optical proximity correction (OPC). Sparse OPC tools typically require a laborious, manual and time consuming OPC optimization approach. In contrast, dense OPC uses pixel-based simulation that does not need as much manual setup. Dense OPC was introduced because sparse simulation methodology causes run times to explode as the pattern density increases, since the number of simulation sites in a given optical radius increases. In this work, we completed a comparison of the OPC modeling performance and run time for the dense and the sparse solutions. The analysis found the computational run time to be highly design dependant. The result should lead to the improvement of the quality and performance of the OPC solution and shed light on the pros and cons of using dense versus sparse solution. This will help OPC engineers to decide which solution to apply to their particular situation.

Citation Download Citation

Amr Abdo, Ian Stobert, Ramya Viswanathan, Ryan Burns, Klaus Herold, Chidam Kallingal, Jason Meiring, James Oberschmidt, and Scott Mansfield "The comparison of OPC performance and run time for dense versus sparse solutions", Proc. SPIE 6924, Optical Microlithography XXI, 69243G (2 April 2008); https://doi.org/10.1117/12.772902

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE