Paper
29 April 2008 Performance evaluation of semi-active equipment isolation system using MR-dampers
Author Affiliations +
Abstract
Critical non-structural equipment, including life-saving equipment in hospitals, circuit breakers, computers, high technology instrumentations, etc., are venerable tostrong earthquakes, and the failure of these equipments may result in a heavy economic loss. In this connection, innovative control systems and strategies are needed for their seismic protections. This paper presents the performance evaluation of passive and semi-active control in the equipment isolation system for earthquake protection. Through shaking table tests of a 3-story steel frame with equipment on the 1nd floor, a MR-damper together with a sliding friction pendulum isolation system is placed between the equipment and floor to reduce the vibration of the equipment. Various control algorithms are used for this semi-active control studies, including the decentralized sliding mode control (DSMC) and LQR control. The passive-on and passive-off control of MR damper is used as a reference for the discussion on the control effectiveness.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yu-Cheng Fan, Chin-Hsiung Loh, Jann N. Yang, and Pei-Yang Lin "Performance evaluation of semi-active equipment isolation system using MR-dampers", Proc. SPIE 6932, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2008, 69320W (29 April 2008); https://doi.org/10.1117/12.773860
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Control systems

Earthquakes

Optical isolators

Feedback signals

Sensors

Feedback control

Algorithm development

Back to Top