High power Al-free DFB laser diode for atomic clocks: narrow line-width and demonstration of saturation spectra of the cesium D2 line

V. Ligeret; D. Holleville; M. Calligaro; M. Lecomte; S. Bansropun; O. Parillaud; N. Dimarcq; M. Krakowski

doi:10.1117/12.781280

8 May 2008 High power Al-free DFB laser diode for atomic clocks: narrow line-width and demonstration of saturation spectra of the cesium D₂ line

V. Ligeret, D. Holleville, M. Calligaro, M. Lecomte, S. Bansropun, O. Parillaud, N. Dimarcq, M. Krakowski

Author Affiliations +

Proceedings Volume 6997, Semiconductor Lasers and Laser Dynamics III; 69971T (2008) https://doi.org/10.1117/12.781280
Event: SPIE Photonics Europe, 2008, Strasbourg, France

Abstract

There is a growing demand for precise gyroscopes and atomic clocks for positioning, flight navigation systems and aerospatial applications. One of the prerequisites for atomic optical pumps is a laser diode with high power (a few 10mW), narrow linewidth (<2MHz), and beam qualities (M²<1.5). Another important factor for aerospatial applications is a very high reliability performance of the laser devices. With an aim to address these issues, we have laid down the technological foundation and further developed ridge waveguide distributed feedback (DFB) laser diodes with an emission wavelength of 852nm corresponding to the D2 cesium transition in atomic clocks. The epitaxy is based on an Al free active region with a GaInP large optical cavity and a single compressive strained GaInAsP quantum well. Fabricated DFB uncoated lasers have shown wavelength emission at 852.12nm with an output optical power of 40mW, a SMSR >30dB at the D₂ line, at 37°C. Low self-heterodyne linewidths of 0.8MHz and 1.2MHz were measured respectively at 20mW 12°C and 40mW 37°C. With this uncoated diode, we have realized saturation spectra of cesium atoms to determine the resolution and the stability of the laser diode working on Cs. The saturation spectrum of the D₂ line of ¹³³Cs was recorded with a resolution close to the natural line width. Preliminary studies of reliability were the measurement of catastrophical optical mirror damage (COMD) for different anti-reflection (AR) coatings. We obtained a COMD density of 19MW/cm².

Citation Download Citation

V. Ligeret, D. Holleville, M. Calligaro, M. Lecomte, S. Bansropun, O. Parillaud, N. Dimarcq, and M. Krakowski "High power Al-free DFB laser diode for atomic clocks: narrow line-width and demonstration of saturation spectra of the cesium D₂ line", Proc. SPIE 6997, Semiconductor Lasers and Laser Dynamics III, 69971T (8 May 2008); https://doi.org/10.1117/12.781280

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
10 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Semiconductor lasers

Cesium

Atomic clocks

High power lasers

Indium gallium phosphide

Chemical species

Laser development

Show All Keywords

Keywords/Phrases

Search In:

Publication Years