Contour scanning of textile preforms using a light-section sensor for the automated manufacturing of fibre-reinforced plastics

R. Schmitt; C. Niggemann; C. Mersmann

doi:10.1117/12.779005

28 April 2008 Contour scanning of textile preforms using a light-section sensor for the automated manufacturing of fibre-reinforced plastics

R. Schmitt, C. Niggemann, C. Mersmann

Author Affiliations +

Proceedings Volume 7003, Optical Sensors 2008; 70031I (2008) https://doi.org/10.1117/12.779005
Event: SPIE Photonics Europe, 2008, Strasbourg, France

Abstract

Fibre-reinforced plastics (FRP) are particularly suitable for components where light-weight structures with advanced mechanical properties are required, e.g. for aerospace parts. Nevertheless, many manufacturing processes for FRP include manual production steps without an integrated quality control. A vital step in the process chain is the lay-up of the textile preform, as it greatly affects the geometry and the mechanical performance of the final part. In order to automate the FRP production, an inline machine vision system is needed for a closed-loop control of the preform lay-up. This work describes the development of a novel laser light-section sensor for optical inspection of textile preforms and its integration and validation in a machine vision prototype. The proposed method aims at the determination of the contour position of each textile layer through edge scanning. The scanning route is automatically derived by using texture analysis algorithms in a preliminary step. As sensor output a distinct stage profile is computed from the acquired greyscale image. The contour position is determined with sub-pixel accuracy using a novel algorithm based on a non-linear least-square fitting to a sigmoid function. The whole contour position is generated through data fusion of the measured edge points. The proposed method provides robust process automation for the FRP production improving the process quality and reducing the scrap quota. Hence, the range of economically feasible FRP products can be increased and new market segments with cost sensitive products can be addressed.

Citation Download Citation

R. Schmitt, C. Niggemann, and C. Mersmann "Contour scanning of textile preforms using a light-section sensor for the automated manufacturing of fibre-reinforced plastics", Proc. SPIE 7003, Optical Sensors 2008, 70031I (28 April 2008); https://doi.org/10.1117/12.779005

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available