Paper
15 July 2008 Low atomic number coating for XEUS silicon pore optics
D. H. Lumb, C. P. Jensen, M. Krumrey, L. Cibik, F. Christensen, M. Collon, M. Bavdaz
Author Affiliations +
Abstract
We describe a set of measurements on coated silicon substrates that are representative of the material to be used for the XEUS High Performance Pore Optics (HPO) technology. X-ray angular reflectance measurements at 2.8 and 8 keV, and energy scans of reflectance at a fixed angle representative of XEUS graze angles are presented. Reflectance is significantly enhanced for low energies when a low atomic number over-coating is applied. Modeling of the layer thicknesses and roughness is used to investigate the dependence on the layer thicknesses, metal and over coat material choices. We compare the low energy effective area increase that could be achieved with an optimized coating design.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. H. Lumb, C. P. Jensen, M. Krumrey, L. Cibik, F. Christensen, M. Collon, and M. Bavdaz "Low atomic number coating for XEUS silicon pore optics", Proc. SPIE 7011, Space Telescopes and Instrumentation 2008: Ultraviolet to Gamma Ray, 70111D (15 July 2008); https://doi.org/10.1117/12.789664
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coating

Reflectivity

Silicon

Platinum

Metals

Mirrors

Tungsten

RELATED CONTENT

Double gradient multilayers for broadband focusing
Proceedings of SPIE (December 23 2003)
La/B4C multilayer mirrors for x-rays below 190 eV
Proceedings of SPIE (November 14 2001)
Characterization of Pd-B, Ag-B, and Si-B interfaces
Proceedings of SPIE (January 01 1992)
Coating of silicon pore optics
Proceedings of SPIE (August 31 2009)

Back to Top