Paper
10 July 2008 VST hydrostatic bearing system control hardware
Author Affiliations +
Abstract
The Hydrostatic Bearing System (HBS) control hardware of the VST (VLT Survey Telescope), a 2.6 m. class Alt-Az telescope in installation phase at Cerro Paranal in Northern Chile, at the European Southern Observatory (ESO) site, is aimed at controlling all the devices present in the HBS pumping station and at monitoring the pressure values in the different points of the plant. The HBS control system is based mainly on a Local Control Unit (LCU) mounted in the HBS control cabinet and connected to the plant by means of proper I/Fs. A distributed pressure and temperature acquisition system, based on General Purpose (GP) acquisition boards, is also present. A local interlock chain and related enabling signal for the Azimuth Axis interlock chain have been implemented to avoid fault propagation in case of lack of delivery pressure. In the present paper all technical details concerning the control and monitoring of the HBS subsystem are given.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. Molfese, P. Schipani, D. Mancini, and S. D'Orsi "VST hydrostatic bearing system control hardware", Proc. SPIE 7012, Ground-based and Airborne Telescopes II, 70123M (10 July 2008); https://doi.org/10.1117/12.786656
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Control systems

Sensors

Telescopes

Transducers

Temperature sensors

Power supplies

Switches

RELATED CONTENT

The control system of the DDRAGO imager of COLIBRÍ, a...
Proceedings of SPIE (August 29 2022)
PLATO control and robotics
Proceedings of SPIE (July 21 2008)
Automation of the OAN SPM 1.5 meter Johnson telescope for...
Proceedings of SPIE (September 17 2012)
VST project: distributed control system overview
Proceedings of SPIE (February 04 2003)

Back to Top