Translator Disclaimer
Paper
14 July 2008 Optimisation of the range gating and calibration processes on the GLAS Rayleigh Laser Guide Star at the WHT
Author Affiliations +
Abstract
The Laser Guide Star commissioned in 2007 at the WHT on La Palma is based on Rayleigh backscattering of a 515 nm beam provided by a diode pumped Q-switched doubled frequency Yb:YAG laser launched from behind the WHT secondary mirror. At the time the laser beam is focused at a distance of 15km above the telescope ground and its power just under 20W. With such a pulsed laser, careful fine tuning of the range gate system is essential to isolate the most focused part of the LGS and eliminate parts of the laser plume which would degrade the Shack-Hartmann spots and consequently AO correction. This is achieved by an electro-optic shutter using Pockels cells, triggered by a delay generator synchronised on the laser pulses, and by spatial filters. Images of 0.15" resolution in J and H bands, very close to expected performance, have been routinely taken as soon as the third and fourth commissioning runs. Here we show the performance of the range gate system as measured and improved over the successive commissioning runs, as well as the off sky and on sky calibration procedures of the LGS AO system.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Olivier Martin, Don Carlos Abrams, Tibor Agócs, Chris Benn, Craige Bevil, Diego Cano, Nigel Dipper, Thomas Gregory, Juan Carlos Guerra, Tim Morris, Richard Myers, Sergio Picó, Samantha Rix, René Rutten, Jure Skvarc, and Simon Tulloch "Optimisation of the range gating and calibration processes on the GLAS Rayleigh Laser Guide Star at the WHT", Proc. SPIE 7015, Adaptive Optics Systems, 70154E (14 July 2008); https://doi.org/10.1117/12.788774
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
Back to Top