A cryogenic dithering stage for moving SPHERE-IRDIS' detector

Ralf-Rainer Rohloff; Thomas Blümchen; Markus Feldt; Vianak Naranjo; Jose Ramos; Klaus-Dieter Müller; Harry Marth; Patrick Pertsch; Kjetil Dohlen

doi:10.1117/12.788839

23 July 2008 A cryogenic dithering stage for moving SPHERE-IRDIS' detector

Ralf-Rainer Rohloff, Thomas Blümchen, Markus Feldt, Vianak Naranjo, Jose Ramos, Klaus-Dieter Müller, Harry Marth, Patrick Pertsch, Kjetil Dohlen

Author Affiliations +

Proceedings Volume 7018, Advanced Optical and Mechanical Technologies in Telescopes and Instrumentation; 701829 (2008) https://doi.org/10.1117/12.788839
Event: SPIE Astronomical Telescopes + Instrumentation, 2008, Marseille, France

Abstract

This paper describes the development of the detector motion stage for the instrument SPHERE (Spectro-Polarimetric High-contrast Exoplanet REsearch). The detector movement is necessary because the instrument SPHERE has exceptional requirements on the flatfield accuracy: In order not to limit planetary detections, the photon response of every pixel with respect to the detector's mean response must be known to an accuracy of 10^-4. As only 10^-3 can be reached by calibration procedures, detector dithering is essential to apply ~100 pixels at a single spatial detection area and time-average the result to reduce the residual flatfield noise. We will explain the design of the unit including the detector package and report on extensive cold and warm tests of individual actuators. The novel, patented NEXLINE^® drive actuator design combines long travel ranges (hundreds of millimeters) with high stiffness and high resolution (better than 0.1 nm). Coordinated motion of shear and longitudinal piezo elements is what allows NEXLINE^® to break away from the limitations of conventional nanopositioning actuators. Motion is possible in two different modes: a high resolution, high dynamics analogue mode, and a step mode with theoretically unlimited travel range. The drive can always be brought to a condition with zero-voltage on the individual piezo elements and with the full holding force available to provide nanometer stability, no matter where it is along its travel range. The NEXLINE^® stage is equipped with capacitive sensors for the closed loop mode. The piezo modules are specially designed for cryogenic application.

Citation Download Citation

Ralf-Rainer Rohloff, Thomas Blümchen, Markus Feldt, Vianak Naranjo, Jose Ramos, Klaus-Dieter Müller, Harry Marth, Patrick Pertsch, and Kjetil Dohlen "A cryogenic dithering stage for moving SPHERE-IRDIS' detector", Proc. SPIE 7018, Advanced Optical and Mechanical Technologies in Telescopes and Instrumentation, 701829 (23 July 2008); https://doi.org/10.1117/12.788839

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available