You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
18 July 2008A type of displacement actuator applied on LAMOST
A type of displacement actuator used in active optics on Astronomical Telescope LAMOST was described in
the paper. Now it have obtained success on the small LAMOST. Tests of the actuator using dual-frequency
laser interferometer give some main parameters of them, and also give influence of condition varieties example
for pull or push force. It show how do these conditons affect the actuator, and how to use the actuator to fit
active optices. Finding out the characteristics after testing, these actuators were applied on the telescope. Some
puzzles were encountered and solved all, which was showed in the paper. Finally we could control these actuators
go forward or backward to several tens of nanometers accurately. By these technologic problems solved in the test and locations, these actuators could be applied on LAMOST or larger Astronomical Telescope.
The alert did not successfully save. Please try again later.
Yajun Zhang, Yongjun Qi, "A type of displacement actuator applied on LAMOST," Proc. SPIE 7019, Advanced Software and Control for Astronomy II, 701928 (18 July 2008); https://doi.org/10.1117/12.786585