Phase shift mask etch process development utilizing a scatterometry-based metrology tool

Jason Plumhoff; Alexander Gray

doi:10.1117/12.793016

19 May 2008 Phase shift mask etch process development utilizing a scatterometry-based metrology tool

Jason Plumhoff, Alexander Gray

Proceedings Volume 7028, Photomask and Next-Generation Lithography Mask Technology XV; 702807 (2008) https://doi.org/10.1117/12.793016
Event: Photomask and NGL Mask Technology XV, 2008, Yokohama, Japan

Abstract

Phase, along with defect levels and CD, must be closely monitored on 45nm technology node masks. The final phase shift of a mask is highly dependent on the ability of the etch tool to stop at precisely the correct depth. Developing etch processes and endpoint recipes for successful phase shift processing depends on rapid and accurate measurement of etch depth. In many mask shops, these measurements are made by either direct phase measurement tools or atomic force microscopes (AFM). These tools have relatively low throughput. In the case of the direct phase measurement tool, the large measurement spot size precludes the measurement of the small features most interesting to mask makers. A need exists for a relatively fast measurement tool that can be applied to features <1μm in size. As part of Oerlikon USA's continuous etch process improvement efforts, the etch depth measurement capabilities of a scatterometry based metrology tool were explored. Phase shift masks (one EAPSM, one AAPSM) were created to act as standards for our experiments. Regions of each mask were etched to various depths using an Oerlikon Mask Etcher system, and then measured with both a commercial AFM and an n&k Technology 1700-RT scatterometry tool. Using this data, recipes capable of measuring quartz trench features, partially-etched MoSi trench features, and bulk MoSi films were developed on the n&k 1700-RT. Phase uniformity data taken from actual etch experiments will be provided, as well as data showing the repeatability of each system, and a comparison of the relative measurement times.

Citation Download Citation

Jason Plumhoff and Alexander Gray "Phase shift mask etch process development utilizing a scatterometry-based metrology tool", Proc. SPIE 7028, Photomask and Next-Generation Lithography Mask Technology XV, 702807 (19 May 2008); https://doi.org/10.1117/12.793016

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
9 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Etching

Quartz

Chromium

Phase shifts

Reflectivity

Metrology

Scatterometry

Show All Keywords

Keywords/Phrases

Search In:

Publication Years