Translator Disclaimer
4 September 2008 X-ray computed tomography system using a multipixel photon counter
Author Affiliations +
A photon-counting K-edge x-ray Computed Tomography (CT) system is useful for discriminating photon energy and for decreasing absorbed dose for patients. The CT system is of the first generation type and consists of an x-ray generator, a turn table, a translation stage, a two-stage controller, a multipixel photon counter (MPPC) module, a 0.5-mm-thick zinc oxide (ZnO) scintillator, a counter board (CB), and a personal computer (PC). Tomography is accomplished by repeating the translation and rotation of an object. Penetrating x-ray photons from the object are detected by the scintillator in conjunction with the MPPC module, and the event signals are counted by the CB. Without using energy discriminating, photon counting CT was carried out by controlling x-ray spectra.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eiichi Sato, Hiroshi Matsukiyo, Akihiro Osawa, Toshiyuki Enomoto, Manabu Watanabe, Jiro Nagao, Purkhet Abderyim, Seiichiro Nomiya, Keitaro Hitomi, Akira Ogawa, and Shigehiro Sato "X-ray computed tomography system using a multipixel photon counter", Proc. SPIE 7079, Hard X-Ray, Gamma-Ray, and Neutron Detector Physics X, 70790H (4 September 2008);


Dual energy x ray computed tomography system using an LSO...
Proceedings of SPIE (September 12 2014)
Dark count less x ray photon counting using an LSO...
Proceedings of SPIE (September 26 2013)
Characteristics of a ceramic substrate x ray diode and its...
Proceedings of SPIE (September 26 2013)
Dual energy X ray photon counting using an LSO MPPC...
Proceedings of SPIE (August 27 2015)
High speed dual energy x ray photon counter Using a...
Proceedings of SPIE (January 28 2019)
Mcps-range photon-counting x-ray computed tomography system
Proceedings of SPIE (September 15 2011)

Back to Top