Low-cost fiber Bragg grating-based static and dynamic strain system for structural monitoring

Daniele Tosi; Massimo Olivero; Guido Perrone

doi:10.1117/12.803186

17 June 2008 Low-cost fiber Bragg grating-based static and dynamic strain system for structural monitoring

Daniele Tosi, Massimo Olivero, Guido Perrone

Author Affiliations +

Proceedings Volume 7098, Eighth International Conference on Vibration Measurements by Laser Techniques: Advances and Applications; 70981G (2008) https://doi.org/10.1117/12.803186
Event: Eighth International Conference on Vibration Measurements by Laser Techniques: Advances and Applications, 2008, Ancona, Italy

Abstract

A fiber Bragg grating sensor for simultaneous static and dynamic strain detection is hereby presented. The principle of operation of the interrogator is based on direct intensity detection: a fixed-wavelength laser source is filtered through the sensing element, and the output power is detected with a photodiode. Multiple sensing for matched-wavelength gratings is performed by splitting the source into multiple channels. The exploitation of cheap components for optical telecommunications results in a low-cost hardware solution that matches several budget-constrained applications. The optical sensor is complemented by signal processing techniques (adaptive filters, spectral estimation, data modeling), capable of improving performances of the system without changing the optical layout. The system has been tested both in static interrogation, as a temperature sensor, and as vibration detector in a typical structural monitoring context. The maximum interrogation range is ~200με, depending on the grating shape, with a resolution <<1 με, and a repeatability of ~1%. A 1% stability over long time has been assessed with a long-term test. The adaptive filtering improves the signal-to-noise ratio of 5.3 dB. The resolution-unlimited spectral estimator resolves resonance peak detection for a vibration of 0.1με.

Citation Download Citation

Daniele Tosi, Massimo Olivero, and Guido Perrone "Low-cost fiber Bragg grating-based static and dynamic strain system for structural monitoring", Proc. SPIE 7098, Eighth International Conference on Vibration Measurements by Laser Techniques: Advances and Applications, 70981G (17 June 2008); https://doi.org/10.1117/12.803186

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE