Paper
25 September 2008 Determination of thermal and elastic coefficients of optical thin-film materials
Author Affiliations +
Abstract
In the aim of describing the thermo-mechanical behaviour of a thin-film filter, simplified models have been studied. An easy way is to determine the evolution of the optical properties of each layer composing the stack, and thus to derive the features change at the component level. Therefore, the knowledge of physical parameters describing each material, such as the coefficient of thermal expansion, the thermo-optic coefficient, the Poisson's ratio and the elasto-optic coefficients, is required. The main challenge is to evaluate these parameters at a single layer level. We propose here a new optical method, based on the analysis of the thermal behaviour of two dedicated Fabry-Perot (FP) structures including a thin disk of the material under study. In parallel, we show through modelling, that we can determine the physical properties of this material with a high accuracy, only by measuring the shift of FP resonance wavelengths. However, we have to take into account the mechanical deformation of the Fabry-Perot structures induced by the thin-film deposition process as well as its evolution with the temperature change (thermal stresses). In this goal, we carried out an accurate study of the thermo-mechanical behaviour of our interferometric structures by using a Finite Element Method.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Michel, F. Lemarquis, and M. Lequime "Determination of thermal and elastic coefficients of optical thin-film materials", Proc. SPIE 7101, Advances in Optical Thin Films III, 71010S (25 September 2008); https://doi.org/10.1117/12.797707
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Dielectrics

Silver

Refractive index

Interferometers

Fabry–Perot interferometers

Thin films

Finite element methods

RELATED CONTENT

Coherent IR bundles made using hollow glass waveguides
Proceedings of SPIE (March 01 2001)
Lab-on-chip module for fluorescence detection
Proceedings of SPIE (March 01 2022)
Laser trimming of thin-film filters
Proceedings of SPIE (October 04 2005)

Back to Top