Mask defect printability in the spacer patterning process

Seiro Miyoshi; Shinji Yamaguchi; Takashi Hirano; Hiromitsu Mashita; Hidefumi Mukai; Ayumi Kobiki; Yuuji Kobayashi; Kohji Hashimoto; Soichi Inoue

doi:10.1117/12.801410

17 October 2008 Mask defect printability in the spacer patterning process

Seiro Miyoshi, Shinji Yamaguchi, Takashi Hirano, Hiromitsu Mashita, Hidefumi Mukai, Ayumi Kobiki, Yuuji Kobayashi, Kohji Hashimoto, Soichi Inoue

Author Affiliations +

Proceedings Volume 7122, Photomask Technology 2008; 71220P (2008) https://doi.org/10.1117/12.801410
Event: SPIE Photomask Technology, 2008, Monterey, California, United States

Abstract

We studied the mask defect printability for both opaque and clear defects in the spacer patterning process. The spacer patterning process consists of the development of photoresist film, the etching of the core film using the photoresist pattern as the etching mask, the deposition of a spacer film on both sides of the core film pattern, and the removal of the core film. The pattern pitch of the spacer film becomes half that of the photoresist. The opaque defect and the clear defect of the mask, respectively, resulted in an "open-short complex" defect and a short defect in the spacer pattern, The defect size of both the opaque and clear defect became smaller as the process proceeded from the development to the core film etching and the spacer pattern fabrication. The decrease of the mask defect printability during the spacer process is likely to be related to the reduction of the line width roughness (LWR) and to the reduction of mask enhanced factor (MEF). The acceptable mask defect size was also studied from the viewpoint of the defect printability to the spacer pattern for both the opaque and clear defect, and found to be 55-60nm, which was relaxed from that in ITRS2007.

Citation Download Citation

Seiro Miyoshi, Shinji Yamaguchi, Takashi Hirano, Hiromitsu Mashita, Hidefumi Mukai, Ayumi Kobiki, Yuuji Kobayashi, Kohji Hashimoto, and Soichi Inoue "Mask defect printability in the spacer patterning process", Proc. SPIE 7122, Photomask Technology 2008, 71220P (17 October 2008); https://doi.org/10.1117/12.801410

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE