Novel mask inspection flow using Sensitivity Control Layers (SCL) on the TeraScanHR-587 platform

Shad Hedges; Chin Le; Mark Eickhoff; Mark Wylie; Tim Simmons; Venu Vellanki; Jeff McMurran

doi:10.1117/12.801480

17 October 2008 Novel mask inspection flow using Sensitivity Control Layers (SCL) on the TeraScanHR-587 platform

Shad Hedges, Chin Le, Mark Eickhoff, Mark Wylie, Tim Simmons, Venu Vellanki, Jeff McMurran

Author Affiliations +

Proceedings Volume 7122, Photomask Technology 2008; 71221G (2008) https://doi.org/10.1117/12.801480
Event: SPIE Photomask Technology, 2008, Monterey, California, United States

Abstract

Conventional photomask inspection techniques utilize global sensitivity for all inspected area in the die; SRAF and OPC features become the sensitivity-limiters, which can result in reduced visibility to defects of interest (DOI). We describe the implementation of Sensitivity Control Layer (SCL), a novel database inspection methodology for the KLA-Tencor TerascanHR platform. This methodology enables inspection at maximum sensitivity in critical die-areas via "layer definition" during job set-up and sensitivity management of the layers during inspection. Memory device inspection performance was improved through the use of up to six control layers to increase sensitivity in the active area while reducing nuisance detections by as much as 100X. The corresponding inspection time was reduced by 30%, illustrating the potential for substantial throughput advantage using SCL. Post-inspection analysis and improved disposition accuracy of the SCL-enabled inspections will also benefit cycle time and higher throughput. In all test cases, sensitivity parameters were increased in the regions of interest over baseline inspections run with typical production-use methodologies. SCL inspection management and application on OPC structures, SRAFs, and MRC violations (slivers) are discussed in detail.

Citation Download Citation

Shad Hedges, Chin Le, Mark Eickhoff, Mark Wylie, Tim Simmons, Venu Vellanki, and Jeff McMurran "Novel mask inspection flow using Sensitivity Control Layers (SCL) on the TeraScanHR-587 platform", Proc. SPIE 7122, Photomask Technology 2008, 71221G (17 October 2008); https://doi.org/10.1117/12.801480

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE