Re-calibration of the NIST SRM 2059 master standard using traceable atomic force microscope metrology

Ronald Dixson; James Potzick; Ndubuisi G. Orji

doi:10.1117/12.801923

17 October 2008 Re-calibration of the NIST SRM 2059 master standard using traceable atomic force microscope metrology

Ronald Dixson, James Potzick, Ndubuisi G. Orji

Author Affiliations +

Proceedings Volume 7122, Photomask Technology 2008; 71222Q (2008) https://doi.org/10.1117/12.801923
Event: SPIE Photomask Technology, 2008, Monterey, California, United States

Abstract

The current photomask linewidth Standard Reference Material (SRM) supplied by the National Institute of Standards and Technology (NIST), SRM 2059, is the fifth generation of such standards for mask metrology. An in house optical microscope tool developed at NIST, called the NIST ultra-violet (UV) microscope, was used in transmission mode to calibrate the SRM 2059 photomasks. Due to the limitations of available optical models for determining the edge response in the UV microscope, the tool was used in a comparator mode. One of the masks was selected as a master standard - and the features on this mask were calibrated using traceable critical dimension atomic force microscope (CD-AFM) dimensional metrology. The optical measurements were then used to determine the relative offsets between the widths on the master standard and individual masks for sale to customers. At the time of these measurements, however, the uncertainties in the CD-AFM reference metrology on the master standard were larger than can now be achieved because the NIST single crystal critical dimension reference material (SCCDRM) project had not been completed. Using our CD-AFM at NIST, we have performed new measurements on the SRM 2059 master standard. The new AFM results are in agreement with the prior measurements and have expanded uncertainties approximately one fourth of those of the earlier results for sub-micrometer features. When the optical comparator data for customers masks are reanalyzed using these new AFM results, we expect to reduce the combined reported uncertainties for the linewidths on the actual SRMs by at least 40 % for the nominal 0.25 μm features.

Citation Download Citation

Ronald Dixson, James Potzick, and Ndubuisi G. Orji "Re-calibration of the NIST SRM 2059 master standard using traceable atomic force microscope metrology", Proc. SPIE 7122, Photomask Technology 2008, 71222Q (17 October 2008); https://doi.org/10.1117/12.801923

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE