Measurement of laser power resistance of fibers for PIV systems

H. Gebauer; M. Jupé; G. Bataviciute; D. Ristau; R. Kling

doi:10.1117/12.804696

30 December 2008 Measurement of laser power resistance of fibers for PIV systems

H. Gebauer, M. Jupé, G. Bataviciute, D. Ristau, R. Kling

Author Affiliations +

Proceedings Volume 7132, Laser-Induced Damage in Optical Materials: 2008; 713219 (2008) https://doi.org/10.1117/12.804696
Event: Boulder Damage Symposium XL Annual Symposium on Optical Materials for High Power Lasers, 2008, Boulder, Colorado, United States

Abstract

Particle Image Velocimetry (PIV) is a well known measurement protocol for analyzing the dynamic behavior of fluids in liquid or gaseous phases (granulate analysis is also possible). With respect to the demands of the measurement accuracy, a high fluence at the observation zone is required. Presently, this can only be realized by using very precisely aligned equipment and high power laser pulses. For industrial applications a simpler set-up is needed. Thus the research project is aimed at the development of a portable endoscopic-based solution which requires the guidance of laser light through optical fibers. The realization of such an optical fiber system is a technical challenge since the high instantaneous energies, which exist in the laser pulse, can cause irreversible damage to the optical fiber. Consequently, the main goal is the determination of the maximum fluences, that different fiber core bulk materials can tolerate, and the comparison of these results with the maximum achievable fluence when transmitting light through optical fibers. A simple theoretical modeling tool for the approximation of the power handling capability was developed. Based on this theoretical analysis, Laser Zentrum Hannover examined the impacts that laser pulses and fiber materials have on light incoupling and guidance. An experimental set-up was developed to investigate the laser light resistance of different fiber bulk materials as well as the fibers themselves. This paper introduces the measurement set-up and the results of LIDT measurements of several fiber core materials. Furthermore, the fiber measurement set-up, achievable fluences, transmission efficiencies as well as the typical fiber damage behavior are presented.

Citation Download Citation

H. Gebauer, M. Jupé, G. Bataviciute, D. Ristau, and R. Kling "Measurement of laser power resistance of fibers for PIV systems", Proc. SPIE 7132, Laser-Induced Damage in Optical Materials: 2008, 713219 (30 December 2008); https://doi.org/10.1117/12.804696

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE